DJI Inspire 1 4500mAh Battery
Get more flight time from your Inspire 1 by bringing along an extra 4500Ah Battery. With built-in charging and capacity sensors for safe use, each TB47 battery gives you up to 18 minutes of flight time. When in flight, remaining battery power is shown live, letting you know how long you can continue to fly. Algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it‘s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. LED indicators tell you remaining battery capacity or charger status. They are visible from the exterior of the aircraft.
• High capacity for up to 18 minutes of flight time
• Four LEDS display both the status and the remaining power of the battery
• Integrated power management and balanced charging capability
• Smart charge/discharge functionality helps to protect your battery
• Easy slot-in design for fast charging and installation/removal
ATTENTION: Traveling with Lithium-Ion Batteries
Please check your airline requirements for traveling with lithium batteries (applicable to TB47 and TB48), the below is for general reference only.
Spare batteries are allowed as carry-on ONLY, and must be individually protected to prevent short circuits. Battery installed in personal electronic devices can be transported as checked baggage. Lithium-ion batteries that contain a maximum of 160 watt hours per battery are permitted (TB48 is 129 watt hours). Batteries not installed in a device (spares) must be in carry-on baggage and no more than two (2) spares between 100 and 160 watt hours are allowed.
Resources: Guides & Manuals
The 99.9Wh TB47 Intelligent Flight Battery for Inspire 1 from DJI is a 6S LiPo battery with a capacity of 4500mAh that is designed specifically for use in the DJI Inspire 1 Quadcopter. The battery features smart circuitry so that you do not require separate balancing leads when charging.
Note: Because of the built-in smart circuitry, this battery should only be used with chargers designed specifically for it. General-purpose RC chargers are not suitable.