Shopping Cart

DJI

DJI Matrice 600 + Ronin-MX

$10,299.00

A combination of the highest quality equipment recommended for the professional aerial photographer that includes the DJI Matrice 600 and the Ronin-MX.

DJI Matrice 600 + Ronin-MX
DJI Matrice 600 + Ronin-MX
DJI Matrice 600 + Ronin-MX

A combination of the highest quality equipment recommended for the professional aerial photographer that includes the DJI Matrice 600 and the Ronin-MX.

The Matrice 600 (M600) is DJI's new flying platform designed for professional aerial photography and industrial applications. It is built to closely integrate with a host of powerful DJI technologies, including the A3 flight controller, Lightbridge 2 transmission system, Intelligent Batteries and Battery Management system, for maximum performance and quick setup.

Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set miss picking up motor noise. 

Matrice 600:

  • Total Integration - The modular design makes the M600 easy to set up and ready to use in just minutes. Its dust proof propulsion systems simplify maintenance while actively cooled motors make for reliable operation during extended periods of time. All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 6kg allows it to fly the Ronin-MX gimbal and a range of cameras from Micro Four Thirds systems to the RED Epic.
  • Smart Flight Safety - The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely and efficiently while A3's self-adaptive flight systems adjust flight parameters automatically based on different payloads. The A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS for enhanced accuracy (A3 Pro and D-RTK GNSS are sold separately).
  • Extended Flight Time and Transmission Range - The M600 features an extended flight time and a 5km long-range, ultra-low latency HD image transmission for accurate image composition and capture. The M600 uses 6 small DJI Intelligent Batteries, allowing it to easily be shipped to wherever it is needed. A customised battery management system and power distribution board allows all six batteries to be turned on with one button press, and keeps the system in flight in the event of a failure of a single battery, and allows users to check the battery status in real-time during flight.
  • Powerful HD Transmission - DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming, USB, mini-HDMI and 3G-SDI ports support video output at up to 1080p/60fps or a broadcast standard output of 720p/59.94fps and 1080i/50fps.
  • Powerful App Control - The M600 supports the DJI GO app and the brand new DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control centre for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The brand new DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator.
  • Open To Development - The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices including the Guidance sensor system, the RKT GNSS units or third party components of your choice.


Ronin-MX

  • Engineered For Professionals - Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set miss picking up motor noise.
  • Powerful and Accurate - Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI's flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilise actively for a smoother shot.
  • Freedom To Move - A slip ring allows the Ronin-MX to rotate 360 degrees continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90 degrees straight down and beyond to 135 degrees. Popular features of the Ronin series such as the three modes of operation and SmoothTrack are also present, giving film makers a range of creative angles and movements.
  • Wireless Control and Transmission - The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 5km away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.
  • Comprehensive App Control - Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization and the Ronin-MX and its behaviour. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.

Important Safety Information

  • You must operate this aircraft in your line–of–sight in daylight. Do not let it get too far away from you.
  • You must not fly closer than 30 metres to vehicles, boats, buildings or people.
  • You must not fly over any populous area, such as beaches, other people’s backyards, heavily populated parks, or sports ovals where there is a game in progress.
  • If you are in controlled airspace, which covers most Australian cities, you must not fly higher than 400 feet (120 metres).
  • You should not fly within 5.5km of an airfield.
  • It’s illegal to fly for money or economic reward unless you have an Remotely Piloted Aircraft Operating Certificate (ReOC) or are flying in accordance with the Civil Aviation Safety Authority (CASA) guidelines (More info: CASA Commercial RPA Use).

Matrice 600:

STRUCTURE
Diagonal Wheelbase: 1133 mm
Aircraft Dimensions:
1668 mm x 1518 mm x 759 mm (Propellers, frame arms and GPS mount unfolded)
640 mm x 582 mm x 623 mm (Frame arms and GPS mount folded)
Package Dimensions: 620 mm x 320 mm x 505 mm
Intelligent Flight Battery Quantity: 6
Weight (with six TB47S batteries): 9.1 kg
Weight (with six TB48S batteries): 9.6 kg
Max Takeoff Weight: 15.1 kg


PROPULSION SYSTEM
Motor Model: DJI 6010
Propeller Model: DJI 2170
OTHER
Supported DJI Gimbals: Zenmuse X3; Zenmuse X5 series; Zenmuse XT; Ronin-MX; Zenmuse Z15 series HD gimbals: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Retractable Landing Gear: Standard
Operating Temperature: 14° to 104° F (-10° to 40° C)


CHARGER
Model: A14-100P1A
Voltage Output: 26.3 V
Power Rating: 100 W
BATTERY (OPTIONAL)
Model: TB48S
Capacity: 5700 mAh
Voltage: 22.8 V
Type: LiPo 6S
Energy: 129.96 Wh
Net Weight: 680 g
Operating Temperature: 14° to 104° F (-10° to 40° C)
Storage Temperature:
Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature: 41° to 104° F (5° to 40° C)
Max Charging Power: 180 W


PERFORMANCE
Hovering Accuracy (P-Mode, with GPS): Vertical: ±0.5 m, Horizontal: ±1.5 m
Max Angular Velocity: Pitch: 300°/s, Yaw: 150°/s
Max Pitch Angle: 25°
Max Speed of Ascent: 5 m/s
Max Speed of Descent: 3 m/s
Max Wind Resistance: 8 m/s
Max Flight Altitude above Sea Level: 2500 m
Max Speed: 18 m/s (No wind)
Hovering Time (with six TB47S batteries)*: No payload: 35 min, 6 kg payload: 16 min
Hovering Time (with six TB48S batteries)*: No payload: 40 min, 5.5 kg payload: 18 min
* The hovering time is based on flying at 10 m above sea level in a no-wind environment and landing with 10% battery level.


FLIGHT CONTROL SYSTEM
Model: A3


REMOTE CONTROLLER
Operating Frequency:
920.6 MHz to 928 MHz (Japan)
5.725 GHz to 5.825 GHz
2.400 GHz to 2.483 GHz
Max Transmission Distance (unobstructed, free of interference):
FCC Compliant: 3.1 miles (5 km)
CE Compliant: 2.1 miles (3.5 km)
EIRP:
10 dBm @ 900 M/li>
13 dBm @ 5.8 G
20 dBm @ 2.4 G
Video Output Port: HDMI, SDI, USB
Dual Users Capability: Master-and-Slave control
Mobile Device Holder: Supports smartphones and tablets
Output Power: 9 W
Operating Temperature: 14° to 104° F (-10° to 40° C)
Storage Temperature:
Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature: 32° to 104° F (0° to 40° C)
Built-in Battery: 6000 mAh, 2S LiPo
Max Tablet Width: 170 mm


BATTERY (STANDARD)
Model: TB47S
Capacity: 4500 mAh
Voltage: 22.2 V
Type: LiPo 6S
Energy: 99.9 Wh
Net Weight: 595 g
Operating Temperature: 14° to 104° F (-10° to 40° C)
Storage Temperature:
Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature: 41° to 104° F (5° to 40° C)
Max Charging Power: 180 W


Ronin-MX:

GENERAL
Built-In Functions:
Operation Modes: Underslung Mode, Upright Mode, Briefcase Mode, Aerial Mode, Jib or Wirecam Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported


MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current: Static current: 300mA (@16V), Dynamic current: 600mA (@16V), Locked motor current: Max 10A (@16V)
Operating Temperature: 5° F ~ 120° F (-15° C ~ 50° C)
Weight: Including handle bar: 6.11 lb (2.77 kg), Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions: Excluding handle bar - 280 mm (W) x 370 mm (D)x 340 mm (H), With handle bar - 560 mm (W) x 370 mm (D) x 440 mm (H)


PERIPHERAL
Camera Tray Dimensions: Maximum depth from the center of gravity on camera base plate: 120mm, Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections: 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power: 4S Ronin-M Battery
Connections: 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements: Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements: iOS 7.1 or above; Android 4.3 or above


WORKING PERFORMANCE
Load Weight (Reference Value): 10 lb (4.5 kg)
Angular Vibration Range: ± 0.02°
Maximum Controlled Rotation Speed: Pan axis: 200°/s, Tilt axis: 100°/s, Roll axis: 30°/s
Mechanical Endpoint Range: Pan axis control: 360°, Tilt axis control: +270° to -150° , Roll axis control: ± 110°
Controlled Rotation Range: Pan axis control: 360°, Tilt axis control: +45° to -135° , Roll axis control: ± 25°